17
3. Web Control
3.1.1 Logon
To use the Projector Web Control function, you need
to logon with your user name and password.
• The language used on the Projector Web Control screen is the
same as that of the OSD on the projector. If you want to change it, you need
to change the OSD language on the projector. (
SCREEN menu in the
Operating Guide)
NOTE
Below are the factory default settings for user
name and password.
User name Password
Administrator <blank>
Enter your user name and password, and then click the [OK].
If you logon successfully, the screen below will be displayed.
Main menu
Click the desired operation or configuration item on the main menu.
3.1 Projector Web Control
Logon window
To Next Page
Loading...
