56
7. Other Functions
7.1 E-mail Alerts
The projector can automatically send an alert message to the specified e-mail
addresses when the projector detects a certain condition that is requiring
maintenance or detected an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses
power.
NOTE
Mail Settings (
24
)
To use the projector’s e-mail alert function, please configure the following items
through a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2) Enter your user name and password, and then click the [OK].
3) Click the [Mail Settings] and configure each item. Refer to item 3.1.5 Mail
Settings (
24) for further information.
4) Click the [Apply] button to save the settings.
• Click the [Send Test Mail] button in the [Mail Settings] to confirm
that the e-mail settings are correct. The following mail will be delivered to the
specified addresses.
NOTE
Subject line
:T
est Mail
<Projector name>
Text :Send Test Mail
Date <Testing date>
Time <Testing time>
IP
Address
<Projector IP address>
MAC
Address
<Projector MAC address>
7. Other Functions
To Next Page
Loading...
