Hitachi CP-S210 User Manual

11
1
ACIN
Connect the connector of the
power cord to the AC inlet of the
projector.
1
2
Firmly plug the power cord’s plug
into the outlet.
WARNING • Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in FIRE and/or ELECTRICAL SHOCK. Please
adhere to the “User’s manual – Safety Guide” and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
AC Inlet
Connector Side
1
Connecting Power Supply
Setting Up (continued)
http://www.pureglare.com.au

Hitachi CP-S210 Specifications

General

Brand	Hitachi
Model	CP-S210
Category	Projector
Language	English