18
Adjusting The Position
1
Press the POSITION button.
As illustrated on the right, a dialog will appear on the screen
to aid you in adjusting the position.
2
Use the
,,,
buttons to adjust
the position.
When you want to initialize the position, press the RESET
button during adjustment.
Press the POSITION button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for RGB input.
• When a menu is displayed, the operation of adjusting the position works
for the position of not the picture but the menu.
NOTE
To Next Page
Loading...
Need help?
General
