52
CP-X2511N(C15I-25N2) / CP-X3011N(C15I-30N2) / CP-X4011N(C15I-40N2) / CP-X2011N(C15-20N2) / ED-X45N(C15-20N2)
Flexible cables of LCD panel
CAUTION
When you detach and attach the main/input
board block, move the block along the the
rear panel of the bottom case so that the
optical unit or plastic sheet will not catch the
input board.
Otherwise, the optical unit might be damaged
and it might cause the light leakage from the
outer casing.
Main board
Dichroic
optics unit
Plastic sheet
Input board
Rear panel
(Bottom case)
1. Remove screws from MAIN board and rear panel.
Remove this screw
2.
Detach the MAIN / INPUT board block, and separate the MAIN board or the INPUT board from the block.
■ Detaching the MAIN board or INPUT board.
Remove there screws
CAUTION
Never swing the
screwdriver while
you loosen this
screw. Otherwise,
the I/O metal will
change.
To Next Page
Loading...
