54
CP-X2511N(C15I-25N2) / CP-X3011N(C15I-30N2) / CP-X4011N(C15I-40N2) / CP-X2011N(C15-20N2) / ED-X45N(C15-20N2)
■ Attaching the MAIN and INPUT boards.
Assemble in reverse order of the disassembling procedure described in the last section.
Use specified type of screws when re-assemblimg.
T3x12 screw
MAIN board
CAUTION
Fasten the main
board, the earth metal
and the CNGD1 cable
with this screw.
Never swing the
screwdriver while you
tighten this screw.
Otherwise, the I/O
metal will change.
Fasten the F-guard earth metal and the
earth metal with the screw (T3x12).
Attach the F-guard earth metal so that
the fan guard and the rib of the lamp
house come into the part of the F-guard
earth metal directed by the arrow.
F-guard
Earth metal
Rib
(lamp house)
Fan guard
Earth metal
CNGD1 cable
M4x8
To Next Page
Loading...
