Hitachi DKC910I - Page 111

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)10-04-30]
Rev.1.1
INST(RM)10-04-30
4. Removing the Power Cables
(1) Lift the latch of the cable holder and pull out the cable holder toward you.
(2) Open the cable holder and remove the two power cables from the DKCPS.
(3) Check the locations of the PDUs to which the power cables removed from the DKCPSs are
connected.
(4) Open the stopper and remove two power cables from the PDU.
(5) Remove repeat binders from the rack frame.
Figure 10-3 Removal Example of Power Cables
DKCPS
PDU
Repeat Binder
Power Cable
DKC-3
DKC-2
DKCPS
Repeat Binder
PDU
Power Cable