Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)11-04-110]
(3) Removing HIEs
(a) Loosen two screws (blue) fixing the HIE to be removed.
(b) Hold the screws (blue) and pull out and remove the HIE.
(c) Insert the dummy into the slot to the end from which the HIE has been removed.
Figure 11-9 Removing the HIE
HIE
Screw (blue)
DKC
Shield finger
Dummy
(d) Remove the other HIEs in the same way.
Rev.4
INST(RM)11-04-110
To Next Page
Loading...
