Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)04-03-100]
Rev.2
INST(RM)04-03-100
10. Removing the SAS Cables/NVMe Cables
(1) Remove the SAS cables/NVMe cables from the ENCxxx-1 on the rear of the Drive Box.
(2) Remove the SAS cables/NVMe cables from the ENCxxx-2 on the rear of the Drive Box.
(3) Remove the SAS cables/NVMe cables from the other Drive Boxes in the same way.
Figure 4-7 Removing SAS Cables/NVMe Cables
UBX is illustrated as an example in the figure. The procedure for SBX/FBX/NBX is the same as
that for UBX.
Rear view of SBX
ENCxxx-1 ENCxxx-2
Rear view of FBX
ENCxxx-1 ENCxxx-2
Drive Box
ENCxxx-1
ENCxxx-2
ENCxxx-1 IN
ENCxxx-1 OUT
ENCxxx-2 OUT
ENCxxx-2 IN
Rear view of UBX
ENCxxx-1 ENCxxx-2
Rear view of NBX
ENCxxx-1 ENCxxx-2
To Next Page
Loading...
