Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)04-03-180]
Rev.2
INST(RM)04-03-180
13. Removing the Drive Boxes
Be careful of the mass:
Work carefully because the mass of the SBX is about 24 kg, UBX is about 27 kg, FBX is about
38 kg, and NBX is about 21 kg.
Be careful of falling over and dropping:
To prevent Drive Box from falling over and dropping, the installation work must be done by two
or more personnel.
(1) Procedure for SBX/UBX/NBX
(a) Remove the Drive Box on the Rack frame referring to mounting procedure using the special
lifter. (Refer to “Mounting Storage System on a Special Lifter” (INST(IN)06-01-10).)
(b) Remove the other Drive Boxes in the same way.
Figure 4-17 Removing Drive Boxes (SBX/UBX/NBX)
Rail
Drive Box
Rail
Rack Frame
(Front View)
To Next Page
Loading...
