Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)04-03-190]
Rev.2
INST(RM)04-03-190
(2) Procedure for FBX
(a) Remove the two screws from the Drive Box.
(b) Remove the Drive Box from the front side of the rack frame by seeing the mounting
procedure using the special lifter. (Refer to “Mounting Storage System on a Special Lifter”
(INST(IN)06-01-10).)
(c) Remove the other Drive Boxes in the same manner.
Figure 4-18 Removing Drive Boxes (FBX)
Rail
Drive Box
Rail
Screw
Rack frame (Front view)
To Next Page
Loading...
