Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)08-01-90]
Rev.0.1
INST(RM)08-01-90
(g) <Wear a wrist strap without fail>
The message “To prevent serious failures caused by the static electrical charge, be sure to wear
a wrist strap on your wrist and connect the earth clip attached on the other side of the wrist
strap to the chassis frame (metal part) before starting operation.” is displayed.
Wear a wrist strap, and then click [OK].
(h) <Confirm wearing wrist strap>
The message “Did you put on a wrist strap on your wrist?” is displayed.
Click [Yes], and then go to Step (i).
NOTE: If you are not wearing a wrist strap, click [No] in response to the message above.
Then, the message below is displayed. Click [Yes] to stop the processing, wear a wrist
strap, and then resume the operation.
“This operation cannot be executed, because the wrist strap has not been worn. Do
you want to stop this process?
[Yes]: This processing will be stopped.
[No]: The confirming message will appear.”.
To Next Page
Loading...
