Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)08-01-150]
Rev.0.1
INST(RM)08-01-150
(4) <Confirming completion of the removal of SVP>
After removal of the SVP, click [OK] in response to the massage shown below.
(Message displayed if the SVP SHUTDOWN LED lights up before removing the SVP)
(Message displayed if the SVP SHUTDOWN LED does not light up before removing the SVP)
(5) <Removal of SSVP>
(a) <Start of the removal>
Click [OK] in response to the message “The SSVP will be removed.”.
To Next Page
Loading...
