Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)08-01-160]
(b) <Removal of SSVP>
The message “Check the location of the SSVP and remove it. (SSVP1) Then, click [OK].” is
displayed.
Go to Step (6).
NOTE: Do not click [OK] in this step. After completing the procedure for removing the SSVP
hardware, click [OK].
Rev.0.1
INST(RM)08-01-160
To Next Page
Loading...
