Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)08-01-201]
For VSP 5500 and VSP 5500H
(i) Remove the LAN cable between the LAN port (U0) on SSVP0 and the LAN port (U0) on
SSVP1. ( ① )
(ii) Remove the LAN cable between the LAN port (U2) on SSVP0 and the LAN port (U2) on
the SSVP1. ( ② )
(iii) Remove the LAN cable between the LAN port (U3) on SSVP1 and the Management LAN
port on the LAN board 2 in DKC-1. ( ③ )
(iv) Remove the LAN cable between the LAN port (U1) on SSVP1 and the Management LAN
port on the LAN board 2 in DKC-0. ( ④ )
(v) Remove the LAN cable kits (two kits) from the HSNBX-1. ( ⑤ )
(7) <Removal of The Additional SSVP>
After removing the SSVP, click [OK].
Rev.3
INST(RM)08-01-201
To Next Page
Loading...
