Hitachi E590 - Hitachi Virtual Storage Platform Hardware Overview; Controller Chassis Components and LEDs

If the login window does not appear, check whether the browser is congured to
allow pop-ups. If pop-ups are allowed, make sure the management console IP
address is set to 192.168.0.18 and the subnet mask is set to 255.255.255.0. If the IP
address and subnet mask are correct and pop-ups are allowed, but the login
window does not appear, contact customer support.
3. In the top-right corner, click the gear icon, and then select User Administration.
4. Click Support Personnel Group.
Changing the default password
Installing your VSP E590 and VSP E790 storage system
Hitachi Virtual Storage System E590, E790 Installation Guide 11