Hitachi E590 - Where to go from here; Configure the storage system for the first time; Read the release notes; Read the latest technical bulletins

Before you begin
■
Log in to the Support Website. If you do not already have an account, you will need to
register. When registering, you will be asked for information about the product you
own. For Product Name, enter VSP E Series. Locate your product serial number, which
is labeled MFG. NO. on the rear of the controller.
■
Obtain the Site ID for the location at which the storage system is installed. If you do
not see your site listed, you will rst need to add the site.
Procedure
1. Download the Hitachi Remote Ops system software and documentation.
2. Open the Hitachi Remote Ops Installation Guide, and follow the installation
instructions.
3. After you congure Hitachi Remote Ops with the appropriate Site ID, open a case on
the Support Website to let us know that your system is installed and that the Hitachi
Remote Ops monitoring system is enabled.
Installing Hitachi Remote Ops completes the self-installation of your storage system.
Where to go from here
After concluding the self-installation successfully, perform the following post-installation
activities.
Configure the storage system for the first time
After you complete the self-installation of your storage system, congure the storage
system to suit your requirements using your choice of embedded interfaces, Ops Center
Administrator, Command Control Interface, or REST API.
For more information, see the user documentation.
Read the release notes
Your storage system undergoes constant development and improvement.
Each time your storage system's rmware is updated, read the release notes. The release
notes provide important information about new features and functions as well as bug
xes.
Read the latest technical bulletins
Technical bulletins are provided to communicate technical information about your
storage system and to assist you with additional information about the proper use,
handling, and solving of technical issues.
You can subscribe to receive technical bulletins, and then you can access technical
bulletins on Hitachi Vantara Support Connect.
Where to go from here
Installing your VSP E590 and VSP E790 storage system
Hitachi Virtual Storage System E590, E790 Installation Guide 23