Item Name Color Description
ON - Normal operation. Storage system is operational.Fast blink - internal
processing. Storage system is operational. Slow blink - offline download processing
completed (maintenance).
LOCATE
LED
Orange OFF - Normal operation
ON - Nonfatal error. Storage system can remain operating.
Contact technical support. See Getting Help in the preface of this manual.
2 ALM LED
(alarm)
Red OFF - Normal operation
ON - Fatal error. Contact technical support. See Getting Help in the preface of this
manual.
3 ACT LED
(Active)
Green OFF - Drive is not being accessed.
Blinking - Drive is being accessed.
Figure 8 2U SFF and LFF drive tray, rear view
Item
Name Color Description
1 POWER LED Green OFF - No power is supplied to the system.
ON - Power is supplied to the system.
READY LED Green ON - Normal operation. Storage system is operational.
Fast blink - Internal processing. Storage system is operational.
Slow blink - Offline download processing completed (maintenance).
LOCATE LED Orange ON - Nonfatal error. Storage system can continue operating.
Contact technical support. See Getting Help in the preface of this manual.
2 ENC IN LED Green ON - Port is connected to an OUT port in the controller. This can be directly
or via another drive box with daisy chained cables
3 ENC IN connector - Connects the drives to the ENC OUT port in the control chassis either
directly or via another drive box with daisy chained cables.
4 ENC OUT connector - Connects the drives to the ENC IN port in the control chassis either directly,
or via another drive box with daisy chained cables.
Introduction 41
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide