Hitachi F350 - Environmental Specifications; Temperature and Humidity

Item Controller Drive tray
Current rating of breaker/
fuse (A)
16.0 (each electrical)
Heat value (normal) (kJ/h) CBSS: 1800 or less
CBSL: 1550 or less
Steady-state power (VA/W)
3
CBSS: 800/760 or less
CBSL: 800/760 or less
Power consumption (VA/W) CBSS: 520/500 or less
CBSL: 450/430 or less
Notes:
1. The power current of Nx2 described in this table is required for a single power
unit.
2. If one power unit fails, another power unit requires electric current for the two
power units. Therefore, plan the power supply facility so that the current-carrying
capacity for one power unit can provide the total capacity for two power units.
3. This table shows the power requirement (100 V or 200 V) for the maximum
conguration . The actual required power might exceed the value shown in the
table when the tolerance is included.
Environmental specifications
The environmental specications for the storage systems are described in the following
table.
Temperature
Caution: The following storage system components are not supported in
high-temperature environments. Do not operate the following components at
temperatures of 40°C or higher:
■
Hitachi Vantara-provided service processor (SVP) server
Environmental specications
Appendix B: System specications
Hitachi Virtual Storage Platform F350, F370 Hardware Reference Guide 55