Hitachi IJ RX2-BD160 - Set up the Touch Screen

6-10 ●Set up the touch screen
YYYY. MM. DD Display in year.month.day order
DD. MM. YYYY Display in day.month.year order
MM. DD. YYYY Display in month.day.year order
ABC ABC layout
QWERTY Layout generally used with PC, etc.
OFF in 3 min.
Touch screen is turned off if there is
no panel input within 3 minutes.
OFF in 30 min.
Touch screen is turned off if there is
no panel input within 30 minutes.
Always on Always on
Setting item Contents Default
Display
● Specifies the time the touch screen is turned on.
[Note] When turn "OFF in 30 min." and "Always on" were
set, the brightness will decrease as the on time
accumulates.
OFF in 3 min.
Keyboard layout
● Changes the keyboard layout.
ABC
Icon display ● For some buttons, icon display or icon hide is set. Enable
Clock display format
● Selects the date format of the clock (current time)
displayed at the upper right-hand corner of the screen.
● This can be set only when Calendar time control is "clock
stop".
YYYY. MM. DD
Confirmation
window for Manual
Control Menu
●When the Startup and Shutdown button or a
button in the Manual Control menu was pressed,
confirmation message display or nondisplay is set.
However, a confirmation message is never displayed even
if the Start Printing button in the Manual Control menu is
pressed.
Display
Arabic input method
● Sets the direction of cursor movement when in Arabic
input mode.
To the left
Startup
Shutdown
M
Manual
6.3 Set up the touch screen
(1) Functions
● Sets the touch screen environment values.
Display Displays a confirmation window.
Non display
Does not display a confirmation
window.
ABCDEFGH I J
KLMNOPQRST
UVWXYZ
ABC layout
QWE R T Y U I O P
ASDFGHJKL
ZXCVBNM
QWERTY layout