Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press the TUNE/SELECT button when the “<” appears
in the display before the station name. When the secondary service ends, the unit will
automatically switch back to the primary station.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press the MENU button and then press the
TUNE/SELECT button to select Manual tune, the
display will now show Manual tune.
2. Turn the
VOLUME/SELECT control to cycle
through the DAB channels, which are numbered
from 5A to 13F.
3. After your desired channel number is selected,
press the TUNE/SELECT button to enter the current
multiplex, the top line will now display the rst
station in the multiplex.
4. Press the TUNE/SELECT button to select a station
that you would like to listen to.
Storing Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must rst be listening to the station that you would like to save,
press and hold the PRESETS button. The “Empty preset #” will show on the display
and the preset number will ash.
2. Turn the
VOLUME/SELECT control to select your desired preset station number
and then press the TUNE/SELECT button to conrm.
3. The station will be stored and the screen will then show “Preset # Saved“.
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it by
pressing the PRESETS button.
2. Turn the
VOLUME/SELECT control to select your desired preset station number.
3. Press the TUNE/SELECT button to conrm the selection.
4. If you choose a preset that hasn’t been allocated a station, the “Empty preset #“ will
be displayed.
12
To Next Page
Loading...
