FM Operation
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press the DAB/FM button once. The display will
show FM and the frequency.
Auto Scan
To search for an FM station, press and hold the TUNE/SELECT button to start the auto scan.
The display will show “Searching ...” . Once a station has been found, the scanning will stop
automatically.
Manual Scan
To search for FM stations manually, press the TUNE/SELECT button. The display will show
“<Tuning>”. Turn the VOLUME/SELECT control until your desired frequency is reached.
Audio Mode
Press the MENU button to toggle between the Auto or Mono selection.
Storing Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must rst be listening to the
station that you would like to save, press and hold
the PRESETS button. The “Empty preset #” will
show on the display and the preset number will
ash.
2. Turn the
VOLUME/SELECT control to select
your desired preset station number and then press
the TUNE/SELECT button to con rm.
3. The station will be stored and the screen will then
show “Preset # Saved“.
The unit will automatically switch between stereo and mono mode, but you can
override this and switch this function manually. This is helpful when receiving poor
signal reception.
14
GB
To Next Page
Loading...
