Power Source
Mains Power
1. Connecting the unit to any other power source may cause damage the
unit. Unwind the mains adapter cable to its full length. Connect the
end of the cable to the DC IN 6V 500 mA socket at the rear
of the unit and then connect the mains adapter to the mains socket.
Make sure the mains adapter is rmly inserted into the mains socket.
The unit is now ready to use.
2. To switch the unit o completely, unplug the mains plug from the
mains socket.
Battery Power
Insert 4 X 1.5V AA batteries (not included)
correctly by following the polarity (+ or –)
indications in the battery compartment.
12
GB
To Next Page
Loading...
