Hitachi KHD101E - Audio and Preset Settings

Audio Setting
FM is able to search for Stereo or Mono stations.
1. Press Menu and then press / to select <Audio setting>. Press
Enter to conrm.
2. Press / to select <Stereo allowed> or <Forced Mono>. Press
Enter to conrm.
The unit will automatically switch between stereo and mono when
<Stereo allowed> is selected depending on the signal strength, but
you can override this and switch this function manually. This is helpful
when receiving poor signal reception.
Presetting Stations
You can store up to 20 of your favourite stations to the memory. This will
enable you to access your favourite stations quickly and easily.
1. To store a preset, you must rst be listening to the station that you
would like to save. Press and hold PRESET. The display will show
“Preset Store <#: (Empty)>”.
2. Press / to select the desired preset station number and then Press
Enter to conrm.
3. The station will be stored and the screen will show “Preset # Saved”.
Recalling a Stored Station
1. Once you have saved a station, you can recall it by pressing PRESET.
2. Press / to select the desired preset station number
3. Press Enter to conrm.
4. If you choose a preset station number that has not been allocated a
station, “Preset Empty” will be displayed.
You may also press and hold P1, P2, P3 or P4 to store your favourite
stations. To recall Preset Store 1/2/3/4, press P1, P2, P3 or P4.
26
GB