Hitachi KHD101E - FM Operation; Switching and Scanning

FM Operation
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press DAB/FM once.
Auto Scan
To search for an FM station, press / and then Press Enter to start the
forward or reverse scanning. ”Scanning…” will show on the display. Once
a station has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, press / repeatedly until your
desired frequency is reached.
With FM radio, it may be necessary to ne tune each station by pressing
/ repeatedly. Each press will adjust the frequency by 0.05 MHz. If
reception is still poor, adjust the position of the aerial or try moving the
radio to another location.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press Menu and then press / to select <Scan setting>. Press Enter
to conrm.
2. Press / to select <All stations> or <Strong stations only>. Press
Enter to conrm.
25
GB