Hitachi KHD101E - Advanced Features

Software Version
1. Press Menu and then press / button to select <SW version>, then
Press Enter to conrm.
2. The software version will show on the display.
3. Press Menu to exit.
Setting Sleep Time
This feature allows you to programme the unit to switch to Standby mode
by itself after a set sleep time.
1. Press Menu button, and then press / button to select <Sleep>,
press ENTER button to conrm.
2. Press / button to browse options (Sleep o, 15, 30, 45, 60 or 90
minutes), then press Enter button to conrm.
3. To view the sleep time, redo step 1 again.
4. To cancel sleep feature while the sleep timer is still counting down,
redo steps 1-2 to select <Sleep o>.
Setting Alarm
Your radio includes dual alarms. To set Alarm, make sure you have set the
time rst.
It is highly recommended to keep the power adapter connected. When the
batteries are completely exhausted, the alarm function will not work.
1. Press Menu button, and then press / button to select <Alarm>,
press Enter button to conrm.
2. Press / button to select <Alarm 1 Setup> or <Alarm 2 Setup>,
and then press Enter button to conrm.
3. Press / button to select options, and then Enter button to conrm
the setting.
Alarm time 00:00 (manually set up the time)
Alarm duration
time
15/30/45/60/90 minutes
17
GB