3- 2
3.2 Function mode
Inverter (logic board) settings can be done as follows.
NO. Functional Display code
SJ300/L300P A monitor or data range
6
For factory adjustment (change prohibition)
change prohibition
18 Inverter area code selection C195
JP(for Japan)/EU(for EC)/USA(for
19 Inverter capacity code selection C196
0.2(0.2)-55.0(75.0)<75.0(90.0)-132.0>
20 Inverter voltage class code selection C197
200(200V class)/400(400V class)
21 Inverter mode change selection C198 00(SJ300)/01(L300P)
Be sure to perform initialization according to the instruction manual after change the data above.
Parameter b085 is prior to C195.
To Next Page
Loading...
