Hitachi NT 32AE2 - Specifications; Nail Selection

English
9
SPECIFICATIONS
Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
NT50AE2 NT32AE2
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
2
)
10" × 9-3/16" × 2-3/8" 10" × 7-3/4" × 2-3/8"
(254 mm × 233 mm × 60 mm) (254 mm × 197 mm × 60 mm)
2.2 lbs. (1.0 kg) 2.0 lbs. (.9 kg)
100 Nails
.025 ft
3
/cycle at 100 psi
(.73 ltr/cycle at 6.9 bar)
(.73 ltr/cycle at 7 kgf/cm
2
)
NAIL SELECTION
WARNING
● Be sure to use only the genuine HITACHI nails for the NT65M2.
The use of any other nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Dimensions of nails
1-1/4" (32 mm)
Max.18 Gauge brad nails Min.
NT50AE2 • NT32AE2 NT50AE2 NT32AE2
.075" (1.9 mm)
5/8" (16 mm)
.050" (1.3 mm)
.049"
(1.25 mm)
.039"
(1 mm)
2" (50 mm)
01Eng_NT50AE2M2_US 10/4/06, 15:489