Hitachi NV 45AB2 - 10-2. Disassembly and Reassembly of the Output Section

--- 25 ---
10-2. Disassembly and Reassembly of the Output Section
(1) Piston Bumper [27], Bumper Sheet [28] and related parts
Tool required:
Hex. bar wrench (4 mm)
Phillips screwdriver
Roll pin puller ( 3 mm (0.118"))
(a) Disassembly (See Figs. 9 and 10.)
Remove the Machine Screw M5 x 22 [39], and the Magazine Ass'y [109] can be disassembled.
Fig. 9
Roll Pin D3x30 [47]
Body Ass'y [24]
Gasket (A) [29]
Cylinder O-Ring (C) [26]
Piston (H) [13]
Piston Bumper [27]
Machine Screw M5 x 22 [39]
Nail Guide [78]
Magazine Ass'y [109]
Nylock Hex. Socket
Hd. Bolt M5 x 16 [34]
Magazine Bushing [67]
Nose Guard [33]
Nose [32]
Bumper Sheet [28]