Hitachi RPC-1.5FSR - MAIN ALARM CODES

FEATURES
1-16
TCI-20007-rev.1
1.4.1 Wired Controller: PC-ARF1
Model: PC-ARF1
Following is an example of how the PC-ARF1 is utilized. If other models of the controller are utilized, operate
the unit according to the manual for that controller.
NOTE
* For detailed descriptions, refer to the "Operation Manual" for the wired controller.
Display Part
LOUV. Adj.
A/C
COOL
Meeting Room
MODE SPEED LOUV. TEMP
FLTR
OK
Motion Sensor ON
Menu
Back/Help ECO
On/Off
Avoid
Filter Sign Indicator
FLTR
It is indicated at the set period for
lter cleaning.
Operation Lock Indicator
It is indicated when the operation
lock function is set. (*)
Schedule Timer Indicator
It is indicated when the schedule
timer function is set. (*)
Directional Key Enter Key
On/O󰀨 Switch
Run Indicator
It lights while the unit is
operated, and it ashes
in abnormal conditions.
Operation Mode
Indicator
The indications of
“HEAT” and “AUTO” are
indicated only for the
heat pump type models.
Operation Guide
Indicator
“Central Control” is
indicated while the
controller operation is
prohibited.
Operation Part
ECO Switch
(*)
Back/Help Switch
To return to the previous
screen.
Menu Switch
(*)
To display Menu.
Fan Speed Indicator
Room Name
Indicator
(*)
The example below references the control panel and all
adjustable settings. The wired controller display may be
di󰀨erent during actual operation.
Motion Sensor
Indicator
It is indicated only for the
lower cover with motion
sensor.
Cold Draft Rest
Indicator
Setting Temperature
Indicator
Swing Louver Indicator
Avoid Air and Receive
Indicator
It is only for the lower cover
with motion sensor. (*)