Hitachi RPC-1.5FSR - Selection Data; Operation Space

SELECTION DATA
< For Single Installation >
< For Parallel Installation >
Min. 40
Min.
300
Min.
300
(mm)
Min. 40
(mm)
Minimum service space to
tighten the suspension bolt
Min.
300
Min. 400
Min.
500
Min.
2500
Min. 8
Floor Level
Minimum service space
for auto louver motor
1-40
TCI-20007-rev.1
4. Selection Data
4.1 Operation Space
NOTE:
If there is a cornice on the ceiling, measure the dimension from the front or undersurface.