Hitachi RPC-1.5FSR - INDOOR UNIT INSTALLATION; FACTORY-SUPPLIED ACCESSORIES

FEATURES
TCI-20007-rev.1
1-19
1.4.4 Central Station: PSC-A64S
Model: PSC-A64S
When opening the cover,
pull the cover in the direction
of the arrow.
The above figure shows the control
timer with the cover opened.
The figure below shows all the indications for reference.
The actual display during operation is different.
Operation Switch Selection
Indication of
Louver Angle
Run Indicator
(Red Lamp)
RUN/STOP Switch
Fan Speed
Selection Switch
Operation Mode
Selection Switch
Timer Selection
Switch
“Remote Control
Switch Not
Available” Switch
Indication of
Operation Mode
"AUTO" is
indicated only
when the
optional function
"Auto
COOL/HEAT"
is set.
Indication of
Fan Speed
Liquid Crystal Display Selection
Indication of
Setting Target
Indication of “NO FUNCTION”
Indication of Each Zone / Each Group
Operation
Indication of Emergency Stop
Group Selection
Switch
“FILTER”
Indication Reset
Switch
Check Switch
Do not touch.
This switch is only
for service use.
Zone Selection
Switch
Indication of
Setting
Temperature
Indication of
Alarm Code
Indication of
“Remote Control
Switch Not
Available”
“ALARM” Indicator
“FILTER” Indicator
“CHECK” Indicator
Temperature
Setting Switch
Auto Louver Switch
Indication of
Timer
Indication of
Demand Control