2-41
SERVICING
(2.2 In-the-Ceiling Type)
(7) Remove four (4) screws fixing the casing onto the motor fixing plate and pull out the casing.
When pulling out the casing, turn the casing by an angle of 180°.
Phillips ScrewdriverTool
(8) Remove two (2) M4 screws fixing the flange in front of the fan motor and remove the flange.
Phillips ScrewdriverTool
TURN OFF all power source switches.
Flange
M4 Screws
Rotate the casing by 180
o
Pull out the casing at this position
M4 Screws
M4 Screws
To Next Page
Loading...
