Hitachi RX

7-28 ●Backing up data to USB memory
2
Copy data ＵＳＢ→ＩＪＰ 2015.07.0712:45
Com=0
[Stop ]
Data type Copy data
Print data
Standard pattern
User pattern
Select the copy target and then press <Start copy>.
Serial number ９９９９９９９９
Folder to be copied
９９９９９９９９
Enable
Enable
Enable
Disable
Disable
Disable
Startcopy
Cancel
M
Manual
Startup
HOME
Proc. Status
Copy data ＵＳＢ→ＩＪＰ 2015.07.0712:45
Com=0
[Stop ]
Copying in progress.
Serial number ９９９９９９９９
Folder to be copied
９９９９９９９９
Data type Copy data
Print data ０／ ２０
Standard pattern ０／ １５
User pattern ０／ ４


Proc. Status ０／ ３９

Enable
Enable
Enable
Disable
Disable
Disable
M
Manual
Startup
HOME
Accessing to USB memory. Don't remove USB memory.
Press Copy data (USB→IJP) .
The copy data screen is displayed.
3
Select the folder (serial number) to be copied.
4
Select the type of data to be copied.
5
Press OK .
A copying in progress screen is displayed.
6
Remove the USB memory.
After data copying is complete, the screen returns to the auxiliary function menu.
Selects the type
of data to be copied.
Selects the folder
to be copied.
Start copy
Shows the data
copying progress.