Hitachi RX

7-30 ●Editing standard pattern
4
Edit standard pattern 2015.07.0712:45
Com=0
[Stop ]
Pattern [E]
Dot matrix
5x8
Back
Restore
Edit
Select Save
E
M
Manual
Startup
HOME
Press OK .
The pattern is selected.
5
Create a pattern at the dot pattern creation area.
When directly touched, the shading of the dot is reversed.
When a dot was reversed by touching it directly, make the display magnification quadruple.
6
Press Save .
The save message screen is displayed.
Restores the pattern
before the change.
Save
Edit