Hitachi RX

●Edit messages to be printed 4-5
Print description 2015.07.0712:45
M
Manual
Startup
Menu
Com=0
[Stop ]
Ink operating time ０(hours)
Cumulative op. time ０(hours)
Print count ０(prints)
Ink pressure  ０．０００(MPa；standard value:０．２５０)
Change
message
Select
message
Overwrite
message
Adjustprint
parameters
Operation
management
Message name[ ]
− ＋
Current user ID : user2
Change message 2015.07.0712:45
SaveandBack
Com=0
[Stop ]
Message name[ ]
:Multiple character sizes can be mixed.
<Format Setup>
− ＋
Print
format
Edit
message
Print
spec.
Various
printsetup
Individual
setup
Overall
setup
:Character size and inter-character space set
value are matched at all lines.
Only 1 column can be input.
Back
Startup
M
Manual
HOME
Change the display contents using the group, search, sort, and select page
functions so that the desired message name is displayed.
3
(2) Operation
The Print description screen is shown below.
Press the Change message on the Print description screen.
The Print format screen is displayed.
1
Press the Back .
To save as a registered print data ,press save and back .
4
Back
Press Individual setup or Overall setup to modify <Format setup>.
2
Change message