Hitachi SJ100 Series

Parameter Settings for DOP/DRW/DOP Plus
Appendix B
B–12
F-06
Acceleration time 1 ACC 1 0010.0s ACC 1 0010.0s
Acceleration time 1, 2nd
motor
2ACC1 0010.0s 2ACC1 0010.0s
2-stage acceleration time ACC CHG TM ACC CHG TM
2-stage acceleration
time, 2nd motor
2ACCCHG TM 2ACCCHG TM
Acceleration time 2 ACC 2 0015.0s ACC 2 0015.0s
Acceleration time 2, 2nd
motor
2ACC2 0015.0s 2ACC2 0015.0s
Acceleration time
change frequency
ACC CHFr 000.0Hz ACC CHFr 000.0Hz
Acceleration time
change frequency, 2nd
motor
2ACCCHFr 000.0Hz 2ACCCHFr 000.0Hz
Acceleration curve
selection
ACC LINE L ACC LINE L
F-07
Deceleration time 1 DEC 1 0010.0s DEC 1 0010.0s
Deceleration time 1, 2nd
motor
2DEC1 0010.0s 2DEC1 0010.0s
Deceleration time 2 DEC 2 0015.0s DEC 2 0015.0s
Deceleration time 2, 2nd
motor
2DEC2 0015.0s 2DEC 2 0015.0s
Deceleration time
change frequency setting
DEC CHFr 000.0Hz DEC CHFr 000.0Hz
Deceleration time
change frequency
setting, 2nd motor
2DECCHFr 000.0Hz 2DECCHFr 000.0Hz
Deceleration curve
setting
DEC LINE L DEC LINE L
F-10
Restart after FRS signal
selection
RUN FRS ZST RUN FRS ZST
Stop mode selection RUN STP DEC RUN STP DEC
Function Mode Setup Displayed Default Setting
User Setting
Func.
Code
Name -FE (Europe) -FU (USA)