Hitachi SJ100 Series

SJ100 Inverter
Appendix B
B–13
F-11
Output frequency setting SPD FS 000.0Hz SPD FS 000.0Hz
Multi-stage 1 setting SPD 1 000.0Hz SPD 1 000.0Hz
Multi-speed 2 setting SPD 2 000.0Hz SPD 2 000.0Hz
Multi-speed 3 setting SPD 3 000.0Hz SPD 3 000.0Hz
Multi-speed 4 setting SPD 4 000.0Hz SPD 4 000.0Hz
Multi-speed 5 setting SPD 5 000.0Hz SPD 5 000.0Hz
Multi-speed 6 setting SPD 6 000.0Hz SPD 6 000.0Hz
Multi-speed 7 setting SPD 7 000.0Hz SPD 7 000.0Hz
Multi-speed 8 setting SPD 8 000.0Hz SPD 8 000.0Hz
Multi-speed 9 setting SPD 9 000.0Hz SPD 9 000.0Hz
Multi-speed 10 setting SPD 10 000.0Hz SPD 10 000.0Hz
Multi-speed 11 setting SPD 11 000.0Hz SPD 11 000.0Hz
Multi-speed 12 setting SPD 12 000.0Hz SPD 12 000.0Hz
Multi-speed 13 setting SPD 13 000.0Hz SPD 13 000.0Hz
Multi-speed 14 setting SPD 14 000.0Hz SPD 14 000.0Hz
Multi-speed 15 setting SPD 15 000.0Hz SPD 15 000.0Hz
F-20
DC braking enable DCB SW OFF DCB SW OFF
DC braking frequency DCB F 00.5Hz DCB F 00.5Hz
DC braking time delay DCB WAIT 0.0s DCB WAIT 0.0s
DC braking force DCB V 000 DCB V 000
DC braking time DCB T 00.0s DCB T 00.0s
F-21
Dynamic braking selec-
tion
BRD-%ED 000.0% BRD-%ED 000.0%
F-22
Allowable instanta-
neous power failure
IPS UVTIME 01.0s IPS UVTIME 01.0s
Standby time after
power failure recovery
IPS WAIT 001.0s IPS WAIT 001.0s
Instantaneous power
failure restart selection
IPS POWR ALM IPS POWR ALM
Function Mode Setup Displayed Default Setting
User Setting
Func.
Code
Name -FE (Europe) -FU (USA)