Hitachi UX - Page 35

●Start operation 7-3
Place a piece of wiping paper, etc., against the ink injection port at the end of the print
head and press the STARTUP → Ready .
●Ink is ejected from the nozzle inside the print head.
●Place a piece of wiping paper, etc., against the ink ejection port in preparation for splashing of the ejected ink.
TEST
STARTPRINTING STARTUP
SETTINGS LOGIN
Ink Jet Startup Confirmation No.050
CONFIRMATION ×
The ink jet will be turned ON.
Solution 1. To change the printer status to Ready, press <Ready>.
2. To change the printer status to Standby, press <Eject ink>.
Ready CancelEject ink
4
Print head
Wiping paper, etc.
Press STARTUP .
Press Ready .