●Remedial action to be taken in the event of a printing failure 9-7
No.
Printing failure
description
(phenomenon)
Probable cause Solution Reference
4
Disordered
characters
There are water, oil, or other
deposits on the print target
surface.
● Make prints with the print
target clear of deposits.
-
The ink pressure has changed.
● Adjust the ink pressure for
the standard value.
6.9 (*2)
Ink and foreign matter are
stuck to the charge and
deflection electrodes.
● Clean the charge and
deflection electrodes.
7.1.2
The flow within the nozzle is
restricted.
● Backwash the nozzle. 6.4 (*2)
The ink has deteriorated. ● Replace the ink. 6.3 (*2)
The excitation V-ref. value is
improper.
● Adjust the excitation V-ref.. 6.10 (*2)
To Next Page
Loading...
Need help?
General
