Hitachi Virtual Storage Platform G130 - Large Form-Factor Drive Tray (DBL)

Large form-factor drive tray (DBL)
The following tables provide information about the DBL drive tray specications and
supported congurations for VSP G130 storage system.
Name Model number Height
Number of
drive slots
Supported
drive type
DBL DW-F800-DBLC 2U (88.2 mm) 12 3.5 inch (LFF)
Physical specications
Item Specification
Physical dimension
(W x D x H) (mm)
482 × 565 × 88.2 mm
Weight/Mass (kg)
(Approximate)
17.4 kg
Start-up time (min)
1
5 to 8 (min)
Height
(EIA unit)
2
2U
Heat output (W) 124 W
Power consumption (VA) 144 VA
Air ow (m
3
/min)
3
2.2 (m
3
/min)
Notes:
1. Start-up times might be longer depending on the number of drive trays
connected. With a maximum conguration 1 controller chassis and 7 drive trays,
start-up time is approximately 8 minutes.
2. Can be mounted on the Hitachi Universal V2 rack. For the mounting, special rails
for the rack and decoration panels are required separately depending on the
number of the mounted storage systems.
3. Value shown is the maximum value.
Large form-factor drive tray (DBL)
Chapter 2: Hardware components and specications
Hitachi Virtual Storage Platform G130 Hardware Reference Guide 39