Hitachi VM-3100A - Page 12

“REW” Button “PLAY” Button
Press this Button during Stop or Fast forward Used for playback of tape recorded in the SP
mode, and fast-rewinding starts. ‘“REW’’ in-%& mode.
dication appears in the viewfinder whenever ~<
the tape counter is present. Press the Button
during playback of tape, and the tape is played
back in the rewind direction approximately 3
times faster than the normal speed to confirm
the recorded contents.
Press ““PLAY” Button to return to normal play-
back mode or press ““STOP”’ Button to stop
tape movement.
J = @ VISUAL SEARCH |
COUNT
DISPLAY RESET
“DISPLAY” Button
When “VIDEO/CAM” Select Switch is set toga.
“VIDEO” position, pressing this Button causes. __
battery indicator and 4-digit tape counter to
appear in the Camera/Recorder’s electronic
viewfinder. Press the Button again to delete all
displays.
When “VIDEO/CAM” Select Switch is set to
“CAM” position, pressing this button causes
the 6-digit date display to appear in the
viewfinder. Pressing the Button again will
cause battery indicator and 4-digit tape counter
to appear in the viewfinder.
Pressing the “DISPLAY” Button once more
clears all graphics from the viewfinder.
WW
“COUNTER RESET” Button
Press to reset the Tape Counter to “0000”.
NOTE:
e Tape Counter and Date displays are stored
for about four hours even if power is turned
off.
17