Hitachi VM-3100A - Page 28

CONNECTIONS
AND
OPERATIONS
FOR
RECORDING
TV
PROGRAM
If
your
TV
has
audio/video
out
jacks,
you
can
record
the
TV
program
with
Camera/Recorder.
25
Audio/Video Input Adaptor
(Accessory No. 10)
To “AUDIO OUT”
and “VIDEO OUT”
. Remove the cable of the Electronic Viewfinder from
the Video Camera/ Recorder.
. Plug Audio/Video Input Adaptor to Video Camera/
Recorder.
. Connect Audio/Video Input Cable (Accessory
No.9) to “AUDIO” and “VIDEO” of the
Audio/Video Input Adaptor (Accessory No. 10).
Connect the other ends to ‘““AUDIO OUT” and
“VIDEO OUT” of your TV respectively.
. Press “EJECT” Button and insert the. cassette.
NOTE: Power source must be connected to the
Video Camera/Recorder.
“EJECT” Button
To “AUDIO”,
“VIDEO”
Audio/Video Input Cable
(Accessory No. 9)
NOOO
. Set “VIDEO/CAM” Select Switch to “CAM”.
. Press ‘7POWER” ON/OFF Button on.
. Press Record Start/Stop Button to start recording.
You are now recording the program you see on
your TV screen.
“VIDEO/CAM"” Select Switch
“POWER” ON/OFF
Button