Hitachi VM-3100A User Manual

PLAYBACK OF PRE-RECORDED CASSETTE
“PLAY”
Button
cannot
be
engaged.
*
Set
“VIDEO/CAM”
Select
Switch
to
“VIDEO”
position.
*
Set
the
television
to
the
Camera/Recorder
channel
(3
or
4)
depending
upon
the
selected
channel
on
the
RF
Channel
Select
Switch
of
RF
Converter
Unit.
No picture appears on television screen when “PLAY”
Button is pressed.
(TV is connected to the Camera/Recorder by using RF
Converter Unit.)
* Adjust “TRACKING” Control.
Interference on playback picture.
»
When
you
see
the
playback
picture
on
your
TV,
adjust
fine
tuning
knob
on
television
set
to
obtain
best
picture.
* The pre-recorded tape is EP or LP recording.
This Camera/Recorder is for use in SP recording
only. ,
* TV receiver is of older type. It needs to be modified
to work properly with Camera/Recorder.
Picture bends at the top of TV screen.
* Tape is damaged. Try another cassette.
*
TV
set
has
VIR
circuit.
Turn
it
off
during
playback.
Color of your TV screen is too bright, too faint or
change.
DEW LIGHT
“DEW (POWER)” Light flashes.
Check Point & Correction
* Condensation on the Camera/ Recorder mechanism
— wait until the Unit has reached normal room
temperature, and condensation has dried.
“DEW (POWER)” Light will then stop flashing.
BATTERY CONDITION
The “‘E’”’ indication in the Electronic Viewfinder flashes | * Try another Battery or charge the Battery.
to indicate Battery is discharged. ;
30

Hitachi VM-3100A Specifications

General

Brand	Hitachi
Model	VM-3100A
Category	Camcorder
Language	English