You can operate the camera/recorder with the wireless remote control (provided) from a
distance. Aim the remote control at the receiver of the camera/recorder.
To remove the remote control
• Press the button and hold it, then remove the remote control.
• After use, house the remote control in the camera/recorder so you will not use it.
Remote controllable range
i
CaUtions on the remote control
Use the remote control indoOrS, when the infiared ray receiver is exposed to direct
sunlight or strong light such as that from artificial lighting, the remote control may not
operate correcUy.
'The remote control cannot be operated if there is an obstacle between the remote Control
and infrared ray receiver.
' The remote contr0! c0de 0f this Camera/recorder is VCR2 i If the remote €0ntroi c0de of
,our VCR is the samel "VCR2"; the VCR may malfunction when this remote control is Used.
To Next Page
Loading...
