Hitachi VSP G130 - Preface and Introduction; Intended Audience and Product Information

Item Description
1 PDUs on the left and right sides of the rack
2. Po
wer on the PDUs.
3. Power on the SVP by pressing the Power On/O button on the left side of the front
panel. Conrm that the power LED on the front panel of the SVP is lit green.
Item Description
1 Power LED on the front of the SVP
2 Power On/O button on the fr
ont of the SVP
Step 3: Power on the storage system
Installing your storage system that includes an SVP
Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide 5