Hitachi VSP G1500

raidcom disconnect external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Provisioning that is associated with the pool to
which the pool volume is belongs.
CMDRJE Executing 2EDA 0000 An internal error occurred by the operation of
disconnecting the external volume.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EDA 0905 An internal error occurred by the operation of
external volume.
Call Hitachi Data Systems customer support.
Table 9-15 SSB codes returned by raidcom modify external_grp
raidcom modify external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 4100 The external volume group is not in the effective
range.
CMDRJE Executing 2E00 410F The specified value of the load balance mode is
invalid.
CMDRJE Executing 2E00 4110 The specified value of the ALUA mode is invalid.
CMDRJE Executing 2E00 8301 MP Blade ID is not in the effective range.
CMDRJE Executing 2E10 4202 The operation cannot be performed because the
volume used for data migration is reserved from
the host.
CMDRJE Executing 2E10 8300 The specified MP Blade is blocked.
CMDRJE Executing 2E11 4107 The attribute cannot be changed because Volume
Migration is being executed.
CMDRJE Executing 2E11 4303 The load balance mode cannot be changed because
the alternative path mode is set to Single.
CMDRJE Executing 2E11 800F The load balance mode cannot be changed because
microcodes of multiple versions are in the storage
system.
CMDRJE Executing 2E20 4100 There is no external volume group.
CMDRJE Executing 2E20 8300 The specified MP Blade is not installed.
CMDRJE Executing 2E30 4104 The attribute cannot be changed because the
external volume is used as a ShadowImage pair
volume.
CMDRJE Executing 2E30 410D The external volume is used as a Universal
Replicator pair volume.
9-34
Troubleshooting
Command Control Interface User and Reference Guide