Hitachi VSP G1500

raidcom modify external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 411A The external volume is used as a TrueCopy
volume.
CMDRJE Executing 2E31 000C Cache mode cannot be changed because there is
an LDEV that Cache Residency Manager bind mode
is set.
CMDRJE Executing 2E31 4101 Cache mode cannot be changed because the
specified external volume includes a pool volume
or an LDEV that is used by LUSE.
CMDRJE Executing 2E31 4107 The cache mode cannot be changed because the
specified external volume is one of the following.
• A pool volume in the pool that consists of both
external volumes and internal volumes.
• A pool volume in the pool whose multi-tier
pool option is enabled.
CMDRJE Executing 2E31 4108 The attribute of the external volume cannot be
changed from the current cache mode to the
specified cache mode.
CMDRJE Executing 2E31 4109 The attribute cannot be changed because the
external volume group is not mapped for online
data migration.
CMDRJE Executing 2EDA 00F1 The specified command cannot be accepted
because the command is not supported.
CMDRJE Executing 2EDA 0905 An internal error occurred on the changing of an
external volume option.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EF3 0002 The specified parameter is incorrect. Check the
Command Control Interface Command Reference.
Table 9-16 SSB codes returned by raidcom modify port -loop_id
raidcom modify port -loop_id
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 01C1 The specified LDEV is used as a quorum disk.
CMDRJE Executing B955 020F The specified LDEV is not installed.
CMDRJE Executing B955 0304 An LU path or a logical path has been defined.
CMDRJE Executing B955 0404 An LU path or a logical path has been defined.
CMDRJE Executing B955 040F An internal error occurred.
CMDRJE Executing B955 044C The specified AL-PA is invalid.
Troubleshooting
9-35
Command Control Interface User and Reference Guide