Hitachi VSP G1500 - Page 510

raidcom modify parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 800F The operation failed because the DKCMAIN
microcode version is mixed.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE
Get Command
Status
Executing/
Async
2E20 0100 There is no parity group.
Get Command
Status
Async 2E30 0005 The volume which Cache Residency Manager is
configured is available in the specified parity
group.
Get Command
Status
Async 2E30 0007 The LDEV of which path is defined is available.
Get Command
Status
Async 2E30 000F The LDEV in the specified parity group is used as
the journal volume.
Get Command
Status
Async 2E30 0038 The LDEV of which size is smaller than the possible
value that can be registered to the pool is in the
specified parity group.
Get Command
Status
Async 2E31 0001 The LDEV in the specified parity group is used as
the quorum disk.
Get Command
Status
Async 2E31 0201 The LDEV in the specified parity group is used as
the pair volume.
Get Command
Status
Async 2E31 0202 The LDEV in the specified parity group is mapped
for the online data migration.
CMDRJE
Get Command
Status
Executing/
Async
2ECF FEEC Internal error occurred. Contact Hitachi Data
Systems customer support.
CMDRJE Executing 2EF3 0102 The specified operation cannot be performed
because the operation is not supported.
Table 9-150 SSB codes returned by raidcom get local_replica_opt
raidcom get local_replica_opt
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing 2EBD FEEC Internal error occurred.
9-186
Troubleshooting
Command Control Interface User and Reference Guide