Table 9-151 SSB codes returned by raidcom modify local_replica_opt
raidcom modify local_replica_opt
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E02 9D01 Multiple option IDs cannot be specified.
CMDRJE Executing 2E02 9D02 The specified option ID is out of the effective
range.
CMDRJE Executing 2E10 8000 The operation cannot be performed because
Storage Navigator or Device Manager - Storage
Navigator is in progress, another application is in
progress on the SVP, or the configuration is being
changed. Wait a while, and then retry the
operation.
CMDRJE Executing 2E11 8019 Shadow Initialize is running.
CMDRJE Executing 2E21 810A A shared memory is not installed.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing 2EBD FEEC Internal error occurred. Contact Hitachi Data
Systems customer support.
CMDRJE Executing 2EBE 9E01 The specified parameter is invalid.
Table 9-152 SSB codes returned by raidcom add license (VSP Gx00 models and VSP
Fx00 models)
raidcom add license
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2EC0 0009 No program product is supported.
CMDRJE Executing 2EC0 0030 The program product cannot be installed because
the history of the trial for the Temporary key
remains.
CMDRJE Executing 2EC0 0051 To install this program product, install or enable
the related program products first.
CMDRJE Executing 2EC0 0052 This program product cannot be installed because
it is pre-installed.
CMDRJE Executing 2EC0 0060 The program product is already installed.
CMDRJE Executing 2EC0 0081 The specified program product ID is invalid.
CMDRJE Executing 2EC0 0090 The specified license key code is invalid.
CMDRJE Executing 2EC0 0091 The serial number is not correct.
CMDRJE Executing 2EC0 0101 The current DKCMAIN firmware version does not
support this program product.
Troubleshooting
9-187
Command Control Interface User and Reference Guide
To Next Page
Loading...
